FinMark FTP CAT 5e 4P 24AWG self-supporting twisted pair cable

FinMark FTP CAT 5e 4P 24AWG self-supporting twisted pair cable

Modifications of Twisted pair
  • FTP CAT5e 4P 24AWG PE-M B 305m Drum
  • FTP CAT5e 4P 24AWG PE-M B 500m Drum

Choose the options that you are interested in.

    Help required?

    Leave us a note and we will contact you as soon as possible!

    Description

     Application: for overhead laying. Cable shell is made of UV stabilized black polyethylene. Under shell there is common screen of alumina-polymer tape. Outer cable diameter is 6,3/2,7 mm. Diameter of steel carrying wire is 1.2 mm.

     

    The main electric properties:

    • Impedance (100±15) Ohm
    • Direct current resistance is 94 Ohm/km
    • Maximum, minimum and average operation temperatures;
    • Propagation velocity is 0,68×s

    Mechanical properties:

    • Cable consists of 4 pairs of conductors weaved between each other.
    • Conductor material: copper wire of 0.51 mm in dia (24 AWG)
    • Conductor insulation is polyethylene, conductor diameter in insulation is 1.03 mm
    • Temperature range:
    • installation -10 °C … +60 °C;
    • operating -30 °C … +60 °C.
    • Minimal bending radius:
    • During erection (dynamic) ≥ 8 x cable diameters.
    • After erection (constant) ≥ 4 x cable diameters.
    • Tensile load ≤ 85 Н
    • In cable there is applied conventional color identification of conductors:
      pair 1: white-blue ⁄ blue
      pair 2: white-orange ⁄ orange
      pair 3: white-green ⁄ green
      pair 4: white-brown ⁄ brown

      Packing: Cable is packed into carton boxes as per Reelex principle, allowing pull cable end out freely except for cable with steel carrying wire. Due to strong rigidity self-supporting cable is wound like coil and packed in carton box.

     

    In this article one can introduce oneself with recommendations referring selection of qualitative cable.