Description

FinMark coaxial cable of Series 6 with additional current-carrying conductors is used for the transmission of CATV high-frequency signal or other types of signals. The main application areas of such cable are  cable TV systems for remote power feeding where local power connection is impossible or is very difficult. This type of cable is also used for video surveillance systems , for direct power supply to the surveillance camera , to remote TV modulators, amplifiers , etc.

FinMark coaxial cable F690B- 2 * 0.75power / F690Bcu- 2 * 0.75power

F690B-2*0.75power / F690Bcu-2*0.75power – a cross-sectional view of the cable has a ” 8 ” shape . One part of the “8” has center conductor with  shielded layer of foil and 90 %  braide  filling which are divided  by physically foamed dielectric. The second part of the” eight” has two copper conductors , each of which is covered with its own sheath. If necessary,the  part of the copper conductors may be easily separated from the overall cable body. Conductors have different colors  (red, black) for identification. For the convenience of  cable termination, there is a special thread for the longitudinal jacket opening. Jacket  color is black.

Geometric data of cable elements:

                                                                                                        * – Averaged

Coaxial cable FinMark 

F690B-2*0.75power-PVC / F690Bcu-2*0.75power-PVC

This cable of series 6 with 90%  braid filling  is covered with its own sheath. Two copper conductors  are superimposed on top of it . The whole design is covered with a PVC outer jacket. Conductors have different colors (red, black) for identification. For the convenience of cable termination, there is a special thread for the longitudinal jacket opening. Jacket color is black.

Geometric data of cable elements: 

                                                                                                    * – Averaged

Materials of cable elements:

• Center conductor: copper (F690Bcu) or steel , copper clad (F690B);
• Dielectric: Foamed polyethylene dielectric;
• 1st shield: aluminum – polypropylene laminated tape glued to dielectric;
• 2nd shield: braid of aluminum wire;
• Sheath: black PVC;
• Current-carrying conductor: copper.

Electrical parameters:

• Nominal impedance , Ohm: 75;
• Nominal velocity of propagation, %: 85.

Attenuation (at 20 °C):