Description

Application:

Coaxial cables of the 11th series with a wave impedance of 75 Ohm are designed for transmitting analog and digital signals in cable, satellite and terrestrial television distribution networks, including those using DOCSIS 2.0 or DOCSIS 3.0, connecting video surveillance systems, connecting terrestrial television and satellite antennas.

FinMark F1160BVМcu coaxial cable is ideal for important sections of the network, where its excellent electrical and operational characteristics are fully used: low attenuation, good shielding, reduced DC resistance, mechanical strength.

The cable has a copper center conductor and is additionally reinforced with steel wire, combining good electrical characteristics and the possibility of suspended installation.

The main places of laying the FinMark F1160BVMcu cable are suspension between buildings, on supports, external laying on walls and on roofs of buildings.

Design:

The FinMark F1160BVMcu cable in cross-section has the form of a “figure eight” with an outer sheath of polyvinyl chloride plastic. On one side there is a coaxial part consisting of a copper central conductor, a physically foamed polyethylene dielectric, a two-layer screen of aluminum foil glued to the dielectric and a braid of 60% filling. The other part of the sheath contains a power steel wire, which can be completely disconnected for ease of cable processing.

Cable designations of the type RG-11, RG-1160 Cu, RG-1160BVM Cu

Among the offers from various manufacturers, it is quite common to find the marking of coaxial cables RG-11, RG-11 with a standard 60% braid, or RG-1160.

Such markings first began to be used in the middle of the 20th century for cables for various purposes. The designation of cables of the type RG has become widespread, so it is sometimes used even now, although this principle no longer accurately describes the features and characteristics of all cable models available on the market.

If you need a coaxial cable with a copper central conductor of the type RG-1160 Cu for suspension, RG-1160BVM Cu or you are looking for a replacement for the old copper cable RG-11 on a cable, with a standard 60% braid, we recommend that you pay attention to the modern model FinMark F1160BVM.

If you are unable to find a cable with the required parameters yourself, ask a question via the form on the website or contact your DEPS manager – we will try to find the best option in the shortest possible time.

Packaging

For ease of transportation, storage and installation, the F 1160BVMcu black FinMark cable is supplied in 305 m coils.